AP and Omni or Patch Antenna All-Thread Drop Mount

ATS-00721 (former catalog number ATS-DRPMNT-UNIV1-OOOP). The AccelTex Solutions All-Thread Drop Mount provides a unique solution to mount a Cisco, Aruba or other T-Bar mounted AP and an AccelTex Omni or Patch antenna in one location using All-Thread. The AP snaps into place by fitting the AP mounting feet into pre-defined keyholes in the mount or using the T-Bar mount supplied with the AP. This mount can be used to lower the height of the antenna and AP in a building with high ceilings or can even be placed above a suspended ceiling. All-Thread and fasteners not included.

SKU: ATS-00721 Categories: ,

Additional information

Dimensions231.14 × 408.94 × 106.68 mm
Vendor

AccelTex Solutions

Country of Origin

China

Colour

White

Indoor/Outdoor

Indoor

Installation Type

3/8" All Thread, Beam Clamp

Material

Steel


View Datasheet

You may also like…

  • Heavy Duty AP and Antenna All-Thread Drop Mount

    Add to Quote Cart

    Heavy Duty AP and Antenna All-Thread Drop Mount

    ATS-02508 (former catalog number ATS-DRPMNT-UNIV1-OOOP-HVD). The AccelTex Solutions Heavy Duty Drop Mount provides a universal solution for enterprise access points (APs) and antenna to mount in one location. The mount provides variety of mounting options that include beam clamps, 3/8″ All-Thread, chain mount and ceiling mount. When using the chain mounting, small horizontal and vertical antenna articulation can be achieved.

    SKU: ATS-02508 Categories: ,

  • Universal AP All-Thread Drop Mount

    Add to Quote Cart

    Universal AP All-Thread Drop Mount

    ATS-00716 (former catalog number ATS-DRPMNT-UNIV1). The AccelTex Solutions Universal All-Thread Drop Mount provides a unique solution to mount a Cisco, Aruba or other T-Bar mounted AP using All-Thread. The AP snaps into place by fitting the AP mounting feet into pre-defined keyholes in the mount or using the T-Bar mount supplied with the AP. This mount can be used to lower the height of the antenna and AP in a building with high ceilings or can even be placed above a suspended ceiling. All-Thread and fasteners not included.

    SKU: ATS-00716 Categories: ,

  • AP and Dual Patch Antenna All-Thread Drop Mount

    Add to Quote Cart

    AP and Dual Patch Antenna All-Thread Drop Mount

    ATS-00705 (former catalog number ATS-DRPMNT-CISCO3-DOP). The AccelTex Solutions AP and Dual Patch Antenna All-Thread Drop Mount provides a unique solution to mount an enterprise access point and up to four patch antennas in one location using All-Thread. This mount can be used to lower the height of the antennas and AP in a building with high ceilings or can even be placed above a suspended ceiling. All-Thread and fasteners not included.

    SKU: ATS-00705 Categories: ,

  • Staggered AP and Omni or Patch Antenna All-Thread Drop Mount

    Add to Quote Cart

    Staggered AP and Omni or Patch Antenna All-Thread Drop Mount

    ATS-02519 (former catalog number ATS-DRPMNT-UNIV1-STGXTD-OOOP). The AccelTex Solutions Staggered AP and Omni or Patch Antenna All-Thread Drop Mount is an updated solution to mount an AP and an Antenna in one location using All-Thread or a Beam Clamp. This mount includes an opening for the antenna leads and allows for the AP to be installed on the bottom level with the Antenna on the top level OR vice-versa.

    SKU: ATS-02519 Categories: ,

  • Staggered AP and Antenna All-Thread Drop Mount in Black

    Add to Quote Cart

    Staggered AP and Antenna All-Thread Drop Mount in Black

    ATS-03574 (former catalog number ATS-DRPMNT-UNIV1-STGXTD-OOOP-BLK). The AccelTex Staggered AP and Omni or Patch Antenna All-Thread Drop Mount in black is an updated solution to mount an AP and an antenna in one location using All-Thread or a Beam Clamp. This mount includes an opening for the antenna leads and allows for the AP to be installed on the bottom level with the antenna on the top level or vice-versa.

    SKU: ATS-03574 Categories: ,

  • Staggered AP and Omni or Patch Antenna All-Thread Drop Mount with Adjusted Beam Clamp Mounting Design

    Add to Quote Cart

    Staggered AP and Omni or Patch Antenna All-Thread Drop Mount with Adjusted Beam Clamp Mounting Design

    ATS-02947 (former catalog number ATS-DRPMNT-UNIV1-STGXTD-OOOP-C1-K). The AccelTex Solutions Staggered AP and Omni or Patch Antenna All-Thread Drop Mount allows an AP and an Antenna to be placed in one location using All-Thread or a Beam Clamp. This latest version has a new beam clamp mounting design to allow for better adjustment to meet the size of beam clamps. The range of beam sizes that the beam clamp can mount to is from 1.5″ wide to 3″ wide up to 5/8″ thick.

    SKU: ATS-02947 Categories: ,

  • Dual AP and Quad Antenna All-Thread Drop Mount

    Add to Quote Cart

    Dual AP and Quad Antenna All-Thread Drop Mount

    ATS-00707 (former catalog number ATS-DRPMNT-DAP-QOP). The AccelTex Solutions Dual AP and Quad Antenna All-Thread Drop Mount provides a unique solution to mount an access point and up to four Omni or Patch antennas in one location using All-Thread or Beam Clamps. Hardware not included.

    SKU: ATS-00707 Categories: ,

Related products

  • Heavy Duty AP and Antenna All-Thread Drop Mount

    Add to Quote Cart

    Heavy Duty AP and Antenna All-Thread Drop Mount

    ATS-02508 (former catalog number ATS-DRPMNT-UNIV1-OOOP-HVD). The AccelTex Solutions Heavy Duty Drop Mount provides a universal solution for enterprise access points (APs) and antenna to mount in one location. The mount provides variety of mounting options that include beam clamps, 3/8″ All-Thread, chain mount and ceiling mount. When using the chain mounting, small horizontal and vertical antenna articulation can be achieved.

    SKU: ATS-02508 Categories: ,

  • AP and Dual Patch Antenna All-Thread Drop Mount

    Add to Quote Cart

    AP and Dual Patch Antenna All-Thread Drop Mount

    ATS-00705 (former catalog number ATS-DRPMNT-CISCO3-DOP). The AccelTex Solutions AP and Dual Patch Antenna All-Thread Drop Mount provides a unique solution to mount an enterprise access point and up to four patch antennas in one location using All-Thread. This mount can be used to lower the height of the antennas and AP in a building with high ceilings or can even be placed above a suspended ceiling. All-Thread and fasteners not included.

    SKU: ATS-00705 Categories: ,

  • Dual AP and Quad Antenna All-Thread Drop Mount

    Add to Quote Cart

    Dual AP and Quad Antenna All-Thread Drop Mount

    ATS-00707 (former catalog number ATS-DRPMNT-DAP-QOP). The AccelTex Solutions Dual AP and Quad Antenna All-Thread Drop Mount provides a unique solution to mount an access point and up to four Omni or Patch antennas in one location using All-Thread or Beam Clamps. Hardware not included.

    SKU: ATS-00707 Categories: ,