All
Showing 457–468 of 474 results
-
SMA Bulkhead Jack to Plug Lightning Arrestor
Add to Quote CartSMA Bulkhead Jack to Plug Lightning Arrestor
ATS-03247 (former catalog number ATS-LP-SMA-BHJ-P). The AccelTex Solutions bi-directional gas discharge tube lightning arrestor protects outdoor equipment from the buildup and discharge of static electricity that affects the operation and lifespan of your network.
-
Staggered AP and Antenna All-Thread Drop Mount in Black
Add to Quote CartStaggered AP and Antenna All-Thread Drop Mount in Black
ATS-03574 (former catalog number ATS-DRPMNT-UNIV1-STGXTD-OOOP-BLK). The AccelTex Staggered AP and Omni or Patch Antenna All-Thread Drop Mount in black is an updated solution to mount an AP and an antenna in one location using All-Thread or a Beam Clamp. This mount includes an opening for the antenna leads and allows for the AP to be installed on the bottom level with the antenna on the top level or vice-versa.
-
Staggered AP and Omni or Patch Antenna All-Thread Drop Mount
Add to Quote CartStaggered AP and Omni or Patch Antenna All-Thread Drop Mount
ATS-02519 (former catalog number ATS-DRPMNT-UNIV1-STGXTD-OOOP). The AccelTex Solutions Staggered AP and Omni or Patch Antenna All-Thread Drop Mount is an updated solution to mount an AP and an Antenna in one location using All-Thread or a Beam Clamp. This mount includes an opening for the antenna leads and allows for the AP to be installed on the bottom level with the Antenna on the top level OR vice-versa.
-
Staggered AP and Omni or Patch Antenna All-Thread Drop Mount with Adjusted Beam Clamp Mounting Design
Add to Quote CartStaggered AP and Omni or Patch Antenna All-Thread Drop Mount with Adjusted Beam Clamp Mounting Design
ATS-02947 (former catalog number ATS-DRPMNT-UNIV1-STGXTD-OOOP-C1-K). The AccelTex Solutions Staggered AP and Omni or Patch Antenna All-Thread Drop Mount allows an AP and an Antenna to be placed in one location using All-Thread or a Beam Clamp. This latest version has a new beam clamp mounting design to allow for better adjustment to meet the size of beam clamps. The range of beam sizes that the beam clamp can mount to is from 1.5″ wide to 3″ wide up to 5/8″ thick.
-
The Accelerator Site Survey Battery Pack V0 (Non 802.3 Compliant)
Add to Quote CartThe Accelerator Site Survey Battery Pack V0 (Non 802.3 Compliant)
ATS-01696 (former catalog number ATS-SSBP-0). The AccelTex Solutions new battery pack ‘The Accelerator’ was specifically designed for use at site surveys. Its small, compact design and battery capacity allows for many hours of continuous use. It is the ultimate site survey tool and is a must-have for all Wi-Fi engineers.
Please note this is a 15W battery pack (non 802.3 compliant). This does not ship with the protective leather battery pack case with straps and velcro, but may be purchased separately.
-
The Accelerator Site Survey Battery Pack V1
Add to Quote CartThe Accelerator Site Survey Battery Pack V1
ATS-01698 (former catalog number ATS-SSBP-1). The AccelTex Solutions new battery pack ‘The Accelerator’ was specifically designed for use at site surveys. Its small, compact design and battery capacity allows for many hours of continuous use. It is the ultimate site survey tool and is a must-have for all Wi-Fi engineers.
-
The Accelerator Site Survey Battery Pack V2
Add to Quote CartThe Accelerator Site Survey Battery Pack V2
ATS-01702 (former catalog number ATS-SSBP-2). The AccelTex Solutions new battery pack ‘The Accelerator’ was specifically designed for use at site surveys. Its small, compact design and battery capacity allows for many hours of continuous use. It is the ultimate site survey tool and is a must-have for all Wi-Fi engineers.
-
Universal AP All-Thread Drop Mount
Add to Quote CartUniversal AP All-Thread Drop Mount
ATS-00716 (former catalog number ATS-DRPMNT-UNIV1). The AccelTex Solutions Universal All-Thread Drop Mount provides a unique solution to mount a Cisco, Aruba or other T-Bar mounted AP using All-Thread. The AP snaps into place by fitting the AP mounting feet into pre-defined keyholes in the mount or using the T-Bar mount supplied with the AP. This mount can be used to lower the height of the antenna and AP in a building with high ceilings or can even be placed above a suspended ceiling. All-Thread and fasteners not included.
-
Universal AP and Antenna Articulating Mount v3
Add to Quote CartUniversal AP and Antenna Articulating Mount v3
ATS-02853 (former catalog number ATS-APANTARTMNT-UNIV3). The AccelTex Solutions Universal AP and Antenna Articulating Mount Version 3 allows an AP and an antenna to be mounted in the same location. The mount can be fastened to a ceiling or wall, to an I-beam or to a piece of all-thread. The mount allows both horizontal and vertical articulation of the antenna. This mount includes a long TBAR mounting plate and includes special insert holes for APs that use DART connectors.
The Version 3 has the following modifications:
- Aruba mounting hole pattern has been added to all included mounting plates for better compatibility with newer Aruba APs.
- All-thread mounting bracket has been redesigned to enhance mounting security and safety.
Antenna adapter plates are available for better compatibility:
- ATS-00518
- ATS-00519
-
Universal AP and Antenna Articulating Mount v3 – Black
Add to Quote CartUniversal AP and Antenna Articulating Mount v3 – Black
ATS-02854 (former catalog number ATS-APANTARTMNT-UNIV3-BLK). The AccelTex Solutions Universal AP and Antenna Articulating Mount Version 3 in black allows an AP and an antenna to be mounted in the same location. The mount can be fastened to a ceiling or wall, to an I-beam or to a piece of all-thread. The mount allows both horizontal and vertical articulation of the antenna. This mount includes a long TBAR mounting plate and includes special insert holes for APs that use DART connectors.
The Version 3 has the following modifications:
- Aruba mounting hole pattern has been added to all included mounting plates for better compatibility with newer Aruba APs.
- All-thread mounting bracket has been redesigned to enhance mounting security and safety.
Antenna adapter plates are available for better compatibility:
-
Universal AP L Bracket Wall Mount – V2
Add to Quote CartUniversal AP L Bracket Wall Mount – V2
ATS-03827 (former catalog number ATS-APLBKT-UNIV1-V2). The AccelTex Solutions AP L Bracket Wall Mount V2 allows an AP to be mounted on a wall while maintaining the preferred horizontal orientation to the ground. This latest version features an opening to pass wires through – allowing for easier cable management during installation. There is also a set screw for added security to mount enterprise APs. The mount features the same easy AP installation of using the pre-defined keyholes. This mount has an updated hole pattern making it more compatible with some of the latest enterprise-class AP releases.
-
Universal AP L Bracket Wall Mount with Complete Cover – Clear
Add to Quote CartUniversal AP L Bracket Wall Mount with Complete Cover – Clear
ATS-02661 (former catalog number ATS-APLBKT-COV-COM-UNIV1-CLR). The AccelTex Solutions Universal AP L Bracket Wall Mount with a Clear Dome Cover allows an AP to be mounted on a wall while still maintaining the preferred horizontal orientation to the ground. The cover is easily removed and hides cabling and power cords running to the AP, creating a very aesthetically pleasing solution for indoor AP mounting. The AP snaps into place by fitting the AP mounting feet into pre-defined keyholes in the mount. The clear cover allows for quick visual inpection of the AP status, simplifying troubleshooting and maintenance tasks. The mount ships with the clear plastic cover, the universal L-Bracket wall mount and mounting hardware.