Heated & Cooled PoE Enclosures
Heated & Cooled PoE Enclosures allow for an access point to be installed in an outdoor or other temperature-limiting environments as extreme as -40 to 120 °C.
Showing all 3 results
-
14x12x6 Heated & Cooled PoE Enclosure for 4 Element N-Style External Antenna
Add to Quote Cart14x12x6 Heated & Cooled PoE Enclosure for 4 Element N-Style External Antenna
ATS-00240 (former catalog number ATS-14126P-S-L-4N-CG-POE-HC). The AccelTex Solutions Heated & Cooled PoE enclosure allows an access point to be installed in an outdoor or other temperature-limiting environment. The heater, fan and AP are all powered by a single PoE cable run from the network switch. The enclosure ships ready for an AP and external antenna installation. This version is for a 4-Element N-Style External Antenna.
The enclosure system components include:
- 14x12x6 polycarbonate enclosure with solid door and latch lock
- Ethernet surge suppressor for 802.3at/af/bt
- 60W PoE Injector and Line Cord (UPOE & 802.3at/af Type 3)
- 12VDC 15W Heater and 3″ Fan
- DC Adjustable Thermostat (Fahrenheit)
- Ethernet Cable (For AP. Customer provides Ethernet to enclosure suppressor)
- Ethernet Surge Suppressor pre-wired to ground
- IP68 Rated Cord Grip
- Blank backplate provides 10″x10.5″ mounting area (Recommend 1/2″ self-tap screws)
- Vents
- 10″ DIN rail
- Dual-Layered Fan Filter
- 7-Port Enclosure Termination Ground Bar
- Ground Lug Assembly with 1/4″ Ring Terminal Connection Point
- N-Style Bulkhead Jack to Plug Lightning Arrestors (4)
- N-Style Jack to N-Style Plug Cable Assemblies (4)
- Right-Angle N-Style Jack to N-Style Plug Adapters (4)
-
14x12x6 Heated & Cooled PoE Enclosure for 4 Element RPSMA External Antenna
Add to Quote Cart14x12x6 Heated & Cooled PoE Enclosure for 4 Element RPSMA External Antenna
ATS-00243 (former catalog number ATS-14126P-S-L-4S-CG-POE-HC). The AccelTex Solutions Heated & Cooled PoE enclosure allows an access point to be installed in an outdoor or other temperature-limiting environment. The heater, fan and AP are all powered by a single PoE cable run from the network switch. The enclosure ships ready for an AP and external antenna installation. This version is for a 4-Element RPSMA External Antenna.
The enclosure system components include:
- 14x12x6 polycarbonate enclosure with solid door and latch lock
- Ethernet surge suppressor for 802.3at/af/bt
- 60W PoE Injector and Line Cord (UPOE & 802.3at/af Type 3)
- 12VDC 15W Heater and 3″ Fan
- DC Adjustable Thermostat (Fahrenheit)
- Ethernet Cable (For AP. Customer provides Ethernet to enclosure suppressor)
- Ethernet Surge Suppressor pre-wired to ground
- IP68 Rated Cord Grip
- Blank backplate provides 10″x10.5″ mounting area (Recommend 1/2″ self-tap screws)
- Vents
- 10″ DIN rail
- Dual-Layered Fan Filter
- 7-Port Enclosure Termination Ground Bar
- Ground Lug Assembly with 1/4″ Ring Terminal Connection Point
- RPSMA Bulkhead Jack to Plug Lightning Arrestors (4)
- RPSMA Jack to RPSMA Plug Cable Assemblies (4)
- Right-Angle RPSMA Jack to RPSMA Plug Adapters (4)
-
14x12x6 Heated & Cooled PoE Enclosure for 4 Element RPTNC External Antenna
Add to Quote Cart14x12x6 Heated & Cooled PoE Enclosure for 4 Element RPTNC External Antenna
ATS-00247 (former catalog number ATS-14126P-S-L-4T-CG-POE-HC). The AccelTex Solutions Heated & Cooled PoE enclosure allows an access point to be installed in an outdoor or other temperature-limiting environment. The heater, fan and AP are all powered by a single PoE cable run from the network switch. The enclosure ships ready for an AP and external antenna installation. This version is for a 4-Element RPTNC External Antenna.
The enclosure system components include:
- 14x12x6 polycarbonate enclosure with solid door and latch lock
- Ethernet surge suppressor for 802.3at/af/bt
- 60W PoE Injector and Line Cord (UPOE & 802.3at/af Type 3)
- 12VDC 15W Heater and 3″ Fan
- DC Adjustable Thermostat (Fahrenheit)
- Ethernet Cable (For AP. Customer provides Ethernet to enclosure suppressor)
- Ethernet Surge Suppressor pre-wired to ground
- IP68 Rated Cord Grip
- Blank backplate provides 10″x10.5″ mounting area (Recommend 1/2″ self-tap screws)
- Vents
- 10″ DIN rail
- Dual-Layered Fan Filter
- 7-Port Enclosure Termination Ground Bar
- Ground Lug Assembly with 1/4″ Ring Terminal Connection Point
- RPTNC Bulkhead Jack to Plug Lightning Arrestors (4)
- RPTNC Jack to RPTNC Plug Cable Assemblies (4)
- Right-Angle RPTNC Jack to RPTNC Plug Adapters (4)