AP & Antenna Mounts
Access Point and Antenna mounts are designed to enhance both functionality and aesthetic appeal in various environments. AccelTex solutions are compatible with access points from all major manufacturers, helping you find the ideal fit for any setup.
Showing all 9 results
-
AP and Dual Patch Antenna All-Thread Drop Mount
Add to Quote CartAP and Dual Patch Antenna All-Thread Drop Mount
ATS-00705 (former catalog number ATS-DRPMNT-CISCO3-DOP). The AccelTex Solutions AP and Dual Patch Antenna All-Thread Drop Mount provides a unique solution to mount an enterprise access point and up to four patch antennas in one location using All-Thread. This mount can be used to lower the height of the antennas and AP in a building with high ceilings or can even be placed above a suspended ceiling. All-Thread and fasteners not included.
-
AP and Omni or Patch Antenna All-Thread Drop Mount
Add to Quote CartAP and Omni or Patch Antenna All-Thread Drop Mount
ATS-00721 (former catalog number ATS-DRPMNT-UNIV1-OOOP). The AccelTex Solutions All-Thread Drop Mount provides a unique solution to mount a Cisco, Aruba or other T-Bar mounted AP and an AccelTex Omni or Patch antenna in one location using All-Thread. The AP snaps into place by fitting the AP mounting feet into pre-defined keyholes in the mount or using the T-Bar mount supplied with the AP. This mount can be used to lower the height of the antenna and AP in a building with high ceilings or can even be placed above a suspended ceiling. All-Thread and fasteners not included.
-
Cisco AIR-ANT2513P4M-N Adapter Plate for ATS-APANTARTMNT-UNIV1
Add to Quote CartCisco AIR-ANT2513P4M-N Adapter Plate for ATS-APANTARTMNT-UNIV1
ATS-00516 (former catalog number ATS-APANTARTMNT-UNIV1-ADP-2513P). The AccelTex Solutions Cisco AIR-ANT2513P4M-N Adapter Plate for the ATS-APANTARTMNT-UNIV1 allows the Cisco 2513P antenna to mount to the AccelTex AP and Antenna Articulating Mount. The adapter plate ships with the fasteners to attach the Cisco antenna to the adapter plate. The original antenna plate that shipped with the AccelTex Mount is discarded and replaced with this adapter plate.
-
Cisco AIR-ANT2566D4M-R Adapter Plate for ATS-APANTARTMNT-UNIV1
Add to Quote CartCisco AIR-ANT2566D4M-R Adapter Plate for ATS-APANTARTMNT-UNIV1
ATS-00518 (former catalog number ATS-APANTARTMNT-UNIV1-ADP-2566D). The AccelTex Solutions Cisco AIR-ANT2566D4M-R Adapter Plate for the Universal AP and Antenna Articulating Mount v3 allows the Cisco 2566D antenna to mount to the AccelTex AP and Antenna Articulating Mount. The adapter plate ships with the fasteners to attach the Cisco antenna to the adapter plate and adapter plate to the AccelTex mount.
-
Dual AP and Quad Antenna All-Thread Drop Mount
Add to Quote CartDual AP and Quad Antenna All-Thread Drop Mount
ATS-00707 (former catalog number ATS-DRPMNT-DAP-QOP). The AccelTex Solutions Dual AP and Quad Antenna All-Thread Drop Mount provides a unique solution to mount an access point and up to four Omni or Patch antennas in one location using All-Thread or Beam Clamps. Hardware not included.
-
Heavy Duty AP and Antenna All-Thread Drop Mount
Add to Quote CartHeavy Duty AP and Antenna All-Thread Drop Mount
ATS-02508 (former catalog number ATS-DRPMNT-UNIV1-OOOP-HVD). The AccelTex Solutions Heavy Duty Drop Mount provides a universal solution for enterprise access points (APs) and antenna to mount in one location. The mount provides variety of mounting options that include beam clamps, 3/8″ All-Thread, chain mount and ceiling mount. When using the chain mounting, small horizontal and vertical antenna articulation can be achieved.
-
Staggered AP and Omni or Patch Antenna All-Thread Drop Mount
Add to Quote CartStaggered AP and Omni or Patch Antenna All-Thread Drop Mount
ATS-02519 (former catalog number ATS-DRPMNT-UNIV1-STGXTD-OOOP). The AccelTex Solutions Staggered AP and Omni or Patch Antenna All-Thread Drop Mount is an updated solution to mount an AP and an Antenna in one location using All-Thread or a Beam Clamp. This mount includes an opening for the antenna leads and allows for the AP to be installed on the bottom level with the Antenna on the top level OR vice-versa.
-
Staggered AP and Omni or Patch Antenna All-Thread Drop Mount with Adjusted Beam Clamp Mounting Design
Add to Quote CartStaggered AP and Omni or Patch Antenna All-Thread Drop Mount with Adjusted Beam Clamp Mounting Design
ATS-02947 (former catalog number ATS-DRPMNT-UNIV1-STGXTD-OOOP-C1-K). The AccelTex Solutions Staggered AP and Omni or Patch Antenna All-Thread Drop Mount allows an AP and an Antenna to be placed in one location using All-Thread or a Beam Clamp. This latest version has a new beam clamp mounting design to allow for better adjustment to meet the size of beam clamps. The range of beam sizes that the beam clamp can mount to is from 1.5″ wide to 3″ wide up to 5/8″ thick.
-
Universal AP and Antenna Articulating Mount v3
Add to Quote CartUniversal AP and Antenna Articulating Mount v3
ATS-02853 (former catalog number ATS-APANTARTMNT-UNIV3). The AccelTex Solutions Universal AP and Antenna Articulating Mount Version 3 allows an AP and an antenna to be mounted in the same location. The mount can be fastened to a ceiling or wall, to an I-beam or to a piece of all-thread. The mount allows both horizontal and vertical articulation of the antenna. This mount includes a long TBAR mounting plate and includes special insert holes for APs that use DART connectors.
The Version 3 has the following modifications:
- Aruba mounting hole pattern has been added to all included mounting plates for better compatibility with newer Aruba APs.
- All-thread mounting bracket has been redesigned to enhance mounting security and safety.
Antenna adapter plates are available for better compatibility:
- ATS-00518
- ATS-00519