AP & Antenna Mounts

Access Point and Antenna mounts are designed to enhance both functionality and aesthetic appeal in various environments. AccelTex solutions are compatible with access points from all major manufacturers, helping you find the ideal fit for any setup.

12/24/48/All

Showing all 7 results

  • Above Ceiling Tile AP and Antenna Mount

    Add to Quote Cart

    Above Ceiling Tile AP and Antenna Mount

    ATS-03101 (former catalog number ATS-CT-ABTL-APANTMNT1). Above Ceiling Tile AP and Antenna Mount is a unique way to mount both an enterprise access point (AP) and an antenna above a suspended ceiling tile grid. This mounting style allows for the aesthetics of the installation environment to be maintained. It is designed with holes for use with safety wire or chain. The antenna mount is adjustable for added flexibility.

    SKU: ATS-03101 Categories: ,

  • AP and Dual Patch Antenna All-Thread Drop Mount

    Add to Quote Cart

    AP and Dual Patch Antenna All-Thread Drop Mount

    ATS-00705 (former catalog number ATS-DRPMNT-CISCO3-DOP). The AccelTex Solutions AP and Dual Patch Antenna All-Thread Drop Mount provides a unique solution to mount an enterprise access point and up to four patch antennas in one location using All-Thread. This mount can be used to lower the height of the antennas and AP in a building with high ceilings or can even be placed above a suspended ceiling. All-Thread and fasteners not included.

    SKU: ATS-00705 Categories: ,

  • AP and Omni or Patch Antenna All-Thread Drop Mount

    Add to Quote Cart

    AP and Omni or Patch Antenna All-Thread Drop Mount

    ATS-00721 (former catalog number ATS-DRPMNT-UNIV1-OOOP). The AccelTex Solutions All-Thread Drop Mount provides a unique solution to mount a Cisco, Aruba or other T-Bar mounted AP and an AccelTex Omni or Patch antenna in one location using All-Thread. The AP snaps into place by fitting the AP mounting feet into pre-defined keyholes in the mount or using the T-Bar mount supplied with the AP. This mount can be used to lower the height of the antenna and AP in a building with high ceilings or can even be placed above a suspended ceiling. All-Thread and fasteners not included.

    SKU: ATS-00721 Categories: ,

  • Dual AP and Quad Antenna All-Thread Drop Mount

    Add to Quote Cart

    Dual AP and Quad Antenna All-Thread Drop Mount

    ATS-00707 (former catalog number ATS-DRPMNT-DAP-QOP). The AccelTex Solutions Dual AP and Quad Antenna All-Thread Drop Mount provides a unique solution to mount an access point and up to four Omni or Patch antennas in one location using All-Thread or Beam Clamps. Hardware not included.

    SKU: ATS-00707 Categories: ,

  • Staggered AP and Antenna All-Thread Drop Mount in Black

    Add to Quote Cart

    Staggered AP and Antenna All-Thread Drop Mount in Black

    ATS-03574 (former catalog number ATS-DRPMNT-UNIV1-STGXTD-OOOP-BLK). The AccelTex Staggered AP and Omni or Patch Antenna All-Thread Drop Mount in black is an updated solution to mount an AP and an antenna in one location using All-Thread or a Beam Clamp. This mount includes an opening for the antenna leads and allows for the AP to be installed on the bottom level with the antenna on the top level or vice-versa.

    SKU: ATS-03574 Categories: ,

  • Staggered AP and Omni or Patch Antenna All-Thread Drop Mount

    Add to Quote Cart

    Staggered AP and Omni or Patch Antenna All-Thread Drop Mount

    ATS-02519 (former catalog number ATS-DRPMNT-UNIV1-STGXTD-OOOP). The AccelTex Solutions Staggered AP and Omni or Patch Antenna All-Thread Drop Mount is an updated solution to mount an AP and an Antenna in one location using All-Thread or a Beam Clamp. This mount includes an opening for the antenna leads and allows for the AP to be installed on the bottom level with the Antenna on the top level OR vice-versa.

    SKU: ATS-02519 Categories: ,

  • Staggered AP and Omni or Patch Antenna All-Thread Drop Mount with Adjusted Beam Clamp Mounting Design

    Add to Quote Cart

    Staggered AP and Omni or Patch Antenna All-Thread Drop Mount with Adjusted Beam Clamp Mounting Design

    ATS-02947 (former catalog number ATS-DRPMNT-UNIV1-STGXTD-OOOP-C1-K). The AccelTex Solutions Staggered AP and Omni or Patch Antenna All-Thread Drop Mount allows an AP and an Antenna to be placed in one location using All-Thread or a Beam Clamp. This latest version has a new beam clamp mounting design to allow for better adjustment to meet the size of beam clamps. The range of beam sizes that the beam clamp can mount to is from 1.5″ wide to 3″ wide up to 5/8″ thick.

    SKU: ATS-02947 Categories: ,